Charging Gel-Cell Batteries

Battery with gel is one of the greatest invention of the 20th century. These find application in motor cycles, wheel chairs and radio communication. They can hold up any amount of heat or cold. And this is the biggest advantage of using this. These batteries are also known as dry cells just because there is no spillage of batteries. These are also commonly known to be free of maintenance batteries and also non – spillage batteries. There is electrolyte embedded between the battery plates made of lead. And due to this fact they are also known as deep cycle batteries. But how to charge gel cell batteries?

A specific charger is required to charge a gel cell battery. Charging via constant voltage is considered the most effective method of charging these batteries. And this kind of charging can be performed by using any of the following methods. We need a gel cell battery for this purpose.

The first type of charging is the fast charging which is called as the cyclic charging. First the batteries are inserted in the charger. It is essential to refer the manual of the batteries and charger. Then the battery is turned on and the batteries are charged until the temperature rises to twenty degree Celsius. And the voltage at its terminal is maintained at about 2.40 volts.

The battery is left to charge at this voltage till the charging current goes below a value as of about 0.01C amps. Where C is the amp hour rating of the gel cell battery. In this charging mode which is cyclic the battery charger is stopped or else it is changed to the mode of float charging.

The next type is the float type of charging. Which is also known as standby service. The user manual is referred well and following it the batteries are inserted in the chargers. Then the battery is turned on and the batteries are charged at a steady rate up to 2.25 and not exceeding 2.30. This is the ideal type of charging. Temperature rises to twenty degree Celsius.

The current level generated from this type of charging is of its own level. When the charger shows an indication of completion the charger is removed from the power supply. And then it is removed.

There are few tips while performing this task. There are also few warnings to be taken care of while doing it. One should avoid over charging and under charging which may cause damage to the battery and even to the charger. Improperly regulated chargers should not be used for this purpose as it may also cause damage to the battery and even to the charger. Charging the batteries near spark or flame can also be avoided so as to have a proper charging. Avoid fast charging always because it will lead to over heat and also cause damage to the battery and even to the charger.

Hence one should always know how to charge gel cell batteries, and the two methods of charging.

Article Source: http://www.entirearticle.com

Find the best Auto parts at bargain prices and much more information on Car Audio for the right music system. Powernetshop.at have the best product evaluation on the internet.

Please Rate this Article

5 out of 54 out of 53 out of 52 out of 51 out of 5 

Not yet Rated